This product is available in our stores
The price applies to a set for one axle without screws.
13mm thick spacers per side with centering flange.
- material - PA6 duralumin
- distance thickness - 13mm per side (26mm per axis)
- hole / collar diameter - 58.1mm
- hole spacing - 5x108mm
- Wheel bolt M12x1.25 40mm Cone
- Wheel bolt M12x1.5 40mm Ball
- Wheel bolt M12x1.5 40mm Cone
- Wheel bolt M14x1.5 40mm Ball
- Wheel bolt M14x1.5 40mm Cone
- screw hardness 10.9
The spacers match:
Alfa Romeo 166 841C000 2.4 JTD 1998-2007
Alfa Romeo 166 841X000 2.4 JTD 20V 1998-2007
Alfa Romeo 166 936A000 3.0 24V 1998-2007
Alfa Romeo 166 936A000 3.2 24V 1998-2007
Alfa Romeo 166 AR34102 2.0 T 1998-2002
Alfa Romeo 166 AR36201 2.5 24V 1998-2007
Alfa Romeo 166 AR36301 2.0 TS 1998-2007
Lancia Gamma ND All trims 1976-1984
Lancia Kappa I4 2.0T 1994-2000
Lancia Kappa I5 2.4i 1994-2000
Lancia Kappa I5 2.4JTD 1994-2000
Lancia Kappa I5 2.4TdS 1994-2000
Lancia Kappa V6 3.0i 1994-2000
Lancia Thesis I5 2.0i 2002-2007
Lancia Thesis I5 2.4i 2002-2009
Lancia Thesis I5 2.4JTD 2002-2009
Lancia Thesis V6 3.0i 2002-2009
Lancia Thesis V6 3.2i 2002-2009
Our distancers are made of PA6 duralumin roller, which makes them very durable and lightweight at the same time, which makes them also great for riding on the track.
Both the hole and the centering flange are created with a tolerance of up to 0.05 mm, which ensures accurate centering of the wheel and prevents the occurrence of vibrations on the steering wheel that occur when the rim is not properly aligned.
Screwed on spacers are also made of duralumin with pressed knurled pins or steel threaded sleeves, which prevents thread breakage. Both pins and sleeves are secured against being pulled out when tightening the wheel by their two-stage shape.
The advantage of the distances is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders.
Thanks to the use of spacers, we can mount rims with other parameters such as larger offset (ET), because we level the difference precisely through the spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of fixing bolts.